Welcome Visitor! Please take a few seconds and Momohenri
Member
- Joined
- Jan 19, 2017
- Messages
- 65
- Reaction score
- 3
- Points
- 8
- Location
- Hogne Belgium
- Vehicle Year
- 1988
- Make / Model
- Ford Bronco II
- Engine Type
- 2.9 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
Well, I removed the od and intermediate servos, clean and re-greased everything, before that I had put a new vb with new solenoids, the first time I had tightened the vb to 11 nm, I tried loosening and tightening to 9.5nm to see if it changed anything , a new adjustable regulator ,try the adjustment in both directions , a new filter with the extension, adjust the bands, check the oil level, adjust the kickdown , still very well in 1.2 and reverse, but if I want to go to 3, it goes back to 1
Any ideas ???
Any ideas ???
