• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Learn from my mistake


Junglejoe

Active Member
Joined
Mar 9, 2016
Messages
493
Reaction score
66
Points
28
Location
Columbia Missouri
Vehicle Year
2006
Make / Model
Ford
Engine Size
6.0
Transmission
Automatic
Can't use an explorer oil filter relocater?
 


svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
That sucks!I have trans dapt at the moment but I replaced all hardware to -an fittings and braided hose because I read somewhere that the factory fittings and or hose leaked.have u tried a different oil filter brand?I had that problem on my mustang.i used fram filter on it and I couldn't get it to stop leaking around filter seal as well.i switched it to a motorcraft problem solved.it might not of been housings just how filter was made itself.i think trans dapt recommends ph8a if I recall right.i might go to motorcraft right away since your having issues.good stuff.
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,411
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
I saw a relocation kit with the adapter bolted to the engine in the center instead of spun on like an oil filter but I don't remember the brand. The one I bought screws on and it's going to make it tough when I take the engine back out.
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
Which one do u have?u put relocators after engine was in not before?
 

Daniel Black

Active Member
V8 Engine Swap
Joined
Jan 28, 2017
Messages
288
Reaction score
44
Points
28
Location
Leicester, NC
Vehicle Year
1987
Make / Model
Ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Tire Size
205/60R15 & 225/60R15
I'll have to look into the Explorer oil filter mount. I don't know what it looks like. I always use a Motorcraft filter on everything. This is the second 302 I've had in this truck and I always put the block mount on before the motor goes in just to make it easier but it should have room to put it on afterwards.
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
That's wired!maybe try a different brand filter before u buy another whole new setup.cheaper that way.
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
Does that fit in the frame rails of a ranger?
 

Daniel Black

Active Member
V8 Engine Swap
Joined
Jan 28, 2017
Messages
288
Reaction score
44
Points
28
Location
Leicester, NC
Vehicle Year
1987
Make / Model
Ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Tire Size
205/60R15 & 225/60R15
That Explorer mount looks huge. I don't think that would fit.
20201108_164451.jpg
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
Which mount did u end up using?
 

Daniel Black

Active Member
V8 Engine Swap
Joined
Jan 28, 2017
Messages
288
Reaction score
44
Points
28
Location
Leicester, NC
Vehicle Year
1987
Make / Model
Ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Tire Size
205/60R15 & 225/60R15
Which mount did u end up using?
I use the Trans-Dapt block mounted part that came with their motor mount kit. The PermaCool filter mount is still leaking. Not enough to be super concerned but enough to make a mess.
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
Do have the part # for that kit by any chance.i got wrong kit so need the 90 degree mount that u have on your engine
 

Daniel Black

Active Member
V8 Engine Swap
Joined
Jan 28, 2017
Messages
288
Reaction score
44
Points
28
Location
Leicester, NC
Vehicle Year
1987
Make / Model
Ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Tire Size
205/60R15 & 225/60R15
Do have the part # for that kit by any chance.i got wrong kit so need the 90 degree mount that u have on your engine
I used this kit.Screenshot_20201123-075747_Chrome.jpg
 

svtcards

Active Member
Supporting Member
V8 Engine Swap
Joined
Sep 4, 2017
Messages
826
Reaction score
137
Points
43
Age
46
Location
Lyman maine
Vehicle Year
1987
Make / Model
ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Total Drop
3'' front 4''back
Tire Size
245 35 18
You just plugged up the other 2 ports and it worked pretty good?
 

Daniel Black

Active Member
V8 Engine Swap
Joined
Jan 28, 2017
Messages
288
Reaction score
44
Points
28
Location
Leicester, NC
Vehicle Year
1987
Make / Model
Ford
Engine Type
V8
Engine Size
302
Transmission
Manual
2WD / 4WD
2WD
Tire Size
205/60R15 & 225/60R15
You just plugged up the other 2 ports and it worked pretty good?
Yeah, it came with plugs for the two ports I didn't use. So far, knock on wood, I haven't had any issues with the block part leaking. You just have to get lucky where it tightens up at. I guess it could tighten where you couldn't get a line on any of the ports.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top