Uncle JuJu
New Member
- Joined
- Jun 25, 2011
- Messages
- 64
- Reaction score
- 1
- Points
- 0
- Location
- Bremerton, Wa
- Vehicle Year
- 1990
- Make / Model
- Ford
- Engine Size
- 3.0L
- Transmission
- Manual
Hey guys! I'm new here (TRS) and have been finding all kinds of good stuff. I am building a Prerunner that was started by someone else. The lady I bought it from knew nothing about the truck, so that is all I know! LOL
I have had this truck for a yr now. When I got it I had to rewire the interior because of years of people that were lazy and didn't care that the clutch pedal was cuting wires! or that the amp hot wire was wire nutted together in 3 places!! I also had to get new shock for the rear because... they were compressing the rear springs 3/4 of an inch! It was a rough ride home let me tell you.
The truck has bent Ford beams?, aftermarket coils, and fiberglass fenders (4in bulge?), and aftermarket trailing arms. 91 excab, 2wd, 3.0L V6, 5sp trans. 3.55gears in the 8.8 rear, and 32's up front and 31's in the rear.
I want to start with the suspension, since it is my DD at the time. Is there any way to tell what kind of suspension is under it?
James
I have had this truck for a yr now. When I got it I had to rewire the interior because of years of people that were lazy and didn't care that the clutch pedal was cuting wires! or that the amp hot wire was wire nutted together in 3 places!! I also had to get new shock for the rear because... they were compressing the rear springs 3/4 of an inch! It was a rough ride home let me tell you.
The truck has bent Ford beams?, aftermarket coils, and fiberglass fenders (4in bulge?), and aftermarket trailing arms. 91 excab, 2wd, 3.0L V6, 5sp trans. 3.55gears in the 8.8 rear, and 32's up front and 31's in the rear.
I want to start with the suspension, since it is my DD at the time. Is there any way to tell what kind of suspension is under it?
James