• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Higher Viscosity Oil for Knocking 3.0l?


Blue_Bunny72

New Member
Joined
Feb 27, 2020
Messages
12
Reaction score
0
Points
1
Location
West Bend Wisconsin
Vehicle Year
1998
Make / Model
Ford Ranger XLT
Transmission
Automatic
I've got a '98 ranger with a 3.0l and it has an obvious spun bearing. I was wondering if bumping up the oil's viscosity on the next change would help squeeze a little more life out of the motor before it kicks a rod through the block (if so, what viscosity would you recommend?). Any feedback is appreciated, thanks!
 


Ranger850

Doesn't get Sarcasm . . .
TRS 20th Anniversary
Joined
Jan 24, 2018
Messages
8,426
Reaction score
4,664
Points
113
Location
Tallahassee Florida
Vehicle Year
2001
Make / Model
Ford
Engine Size
Born with a 3.0, looking for a donor V8
Transmission
Manual
2WD / 4WD
2WD
Total Lift
Stock 2"
Tire Size
Stock
My credo
Doing things wrong, until I get it right.
Sounds like a game of "Russian Roulette"
Thicker oil will not get into the tiny spaces good enough, which could cause failure
Thinner oil will get into the tiny spaces, but wont help you with your issues, which could cause failure.
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
If the bearing is spun how would oil get to it now anyway. The oil passage would no longer be open. :icon_thumby:
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,412
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
Do you really want the engine to decide when and where you'll be stranded? It's not going to heal up if you don't fix it and if it has a catastrophic failure the repair cost will go way up.
 

Blue_Bunny72

New Member
Joined
Feb 27, 2020
Messages
12
Reaction score
0
Points
1
Location
West Bend Wisconsin
Vehicle Year
1998
Make / Model
Ford Ranger XLT
Transmission
Automatic
Do you really want the engine to decide when and where you'll be stranded? It's not going to heal up if you don't fix it and if it has a catastrophic failure the repair cost will go way up.
I never drive more than 20 miles away, and I'm already planning a 5.0 swap for when the time comes. I just want to milk this 3.0 for all it's got. No need to worry :)
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Have fun with that I guess. :dunno:

If it truly has a spun bearing you probably wont make that 20 miles...
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,412
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
I have a pair of bright orange nitrile gloves, you should get some,too. That way your thumb will be easier to see when you're hitch hiking back home.
Squeezing out the last 20 miles is a Yankee thing to do, I didn't think Wisconsin had any.
 

Uncle Gump

Token Old Guy
TRS Event Staff
TRS Forum Moderator
Supporting Member
VAGABOND
TRS Event Participant
Joined
Sep 17, 2018
Messages
13,710
Reaction score
13,166
Points
113
Location
Ottawa IL
Vehicle Year
2006/1986
Make / Model
Ranger/BroncoII
Engine Size
4.0L SOHC/2.9L
2WD / 4WD
4WD
My credo
Lead follow or get out of my way
Are you saying you hear a little lower end noise?

If you spun a bearing... well... you would know... and wouldn't be asking us what oil to use.

Fill it up with 20w50... then drive it like an old man. Get your part together for your swap.
 

Rick W

Well-Known Member
Supporting Member
TRS Event Participant
Joined
May 15, 2020
Messages
2,271
Reaction score
3,691
Points
113
Age
68
Location
Atlanta
Vehicle Year
1997 1987
Make / Model
Ranger XLT x2
Engine Type
4.0 V6
Engine Size
4.0 & 2.9
Transmission
Manual
2WD / 4WD
4WD
Total Lift
97 stock, 3” on 87
Total Drop
N/A
Tire Size
235/75-15
My credo
Never put off ‘til tomorrow what you can put off indefinitely
Yeah, my 5-cylinder ranger doesn’t work so good...

I don’t know how handy you are, but 50 years ago on my first truck, a 3-wheel drive Chevy (it was 4-wheel drive 18 years before I bought it), I could drop the pan, shine up the crank with emery paper, put in a new bearing and get another 4-500 miles on it driving it gently. I was broke in college, and I could do the swap in about 1-1/2 hours in the snow. Did it three times before old “Candy” blew up. I paid $135 for the truck and sold it for $75 with the blown engine. Financially, it was probably my best automotive investment....

I agree with Ranger850, I don’t think there’s any oil that would make a difference without causing equal problems on the small ports. The viscosity isn’t the issue. Once there’s space (the knock), it will keep hammering out the bearing until it breaks.

If the engine is otherwise tight, before it breaks, if it’s not spreading shavings now, you could probably pull the crank without pulling the heads and pistons, and have it refinished or replaced for less money than a rebuild. I think the engine has to come out in a Ranger. My old Chevy, you could pull the pan and swap it if you just loosened up one motor mount...

good luck with it.
 

cbxer55

Well-Known Member
Joined
Oct 9, 2009
Messages
1,863
Reaction score
763
Points
113
Location
Midwest City, Oklahoma
Vehicle Year
1998
Make / Model
Ford
Engine Size
3.0
Transmission
Automatic
Sounds like a game of "Russian Roulette"
Thicker oil will not get into the tiny spaces good enough, which could cause failure
Thinner oil will get into the tiny spaces, but wont help you with your issues, which could cause failure.
Haha. I've been running 20w-50 oil in my 98 3.0 Ranger since January 2000. Had 10,000 miles on it at the time, near 170,000 now. Never a single problem.
 

Rick W

Well-Known Member
Supporting Member
TRS Event Participant
Joined
May 15, 2020
Messages
2,271
Reaction score
3,691
Points
113
Age
68
Location
Atlanta
Vehicle Year
1997 1987
Make / Model
Ranger XLT x2
Engine Type
4.0 V6
Engine Size
4.0 & 2.9
Transmission
Manual
2WD / 4WD
4WD
Total Lift
97 stock, 3” on 87
Total Drop
N/A
Tire Size
235/75-15
My credo
Never put off ‘til tomorrow what you can put off indefinitely
& let’s be careful with that “old man” stuff....
 

Ranger850

Doesn't get Sarcasm . . .
TRS 20th Anniversary
Joined
Jan 24, 2018
Messages
8,426
Reaction score
4,664
Points
113
Location
Tallahassee Florida
Vehicle Year
2001
Make / Model
Ford
Engine Size
Born with a 3.0, looking for a donor V8
Transmission
Manual
2WD / 4WD
2WD
Total Lift
Stock 2"
Tire Size
Stock
My credo
Doing things wrong, until I get it right.
Haha. I've been running 20w-50 oil in my 98 3.0 Ranger since January 2000. Had 10,000 miles on it at the time, near 170,000 now. Never a single problem.
I personally run thick oil too, that's a whole other debate i do not care to have, again. I just dont think it was going to help with OP's issues.
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
I don't say this enough, but....

Engines is goes vroom.
 

Rick W

Well-Known Member
Supporting Member
TRS Event Participant
Joined
May 15, 2020
Messages
2,271
Reaction score
3,691
Points
113
Age
68
Location
Atlanta
Vehicle Year
1997 1987
Make / Model
Ranger XLT x2
Engine Type
4.0 V6
Engine Size
4.0 & 2.9
Transmission
Manual
2WD / 4WD
4WD
Total Lift
97 stock, 3” on 87
Total Drop
N/A
Tire Size
235/75-15
My credo
Never put off ‘til tomorrow what you can put off indefinitely
Hmmm, not rat-a-tat-tat?
 

Uncle Gump

Token Old Guy
TRS Event Staff
TRS Forum Moderator
Supporting Member
VAGABOND
TRS Event Participant
Joined
Sep 17, 2018
Messages
13,710
Reaction score
13,166
Points
113
Location
Ottawa IL
Vehicle Year
2006/1986
Make / Model
Ranger/BroncoII
Engine Size
4.0L SOHC/2.9L
2WD / 4WD
4WD
My credo
Lead follow or get out of my way
& let’s be careful with that “old man” stuff....
Didn't mean to offend anyone... so I'll change it to... Drive it like Uncle Gump...
 

Sponsored Ad


Sponsored Ad

Staff online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top