• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

HELP!!! Cant get the Engine Separated from the Trans......


dvdswan

Well-Known Member
U.S. Military - Veteran
Joined
Feb 11, 2021
Messages
2,832
Reaction score
2,900
Points
113
Location
Seattle, WA
Vehicle Year
1991
Make / Model
Ranger XLT 2WD
Engine Type
3.0 V6
Transmission
Automatic
2WD / 4WD
2WD
My credo
Keep your mind like an umbrella, it only works if its open... Continually learning.
At this point, I would just pull the trans with the engine.
 


adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15

Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.
I have 4.0 OHV and 5 speed. The very top bellhousing bolts I jack up the trans and access them from under the hood.
 

noog67

New Member
U.S. Military - Veteran
Joined
Aug 12, 2007
Messages
25
Reaction score
3
Points
3
Location
NE Pa.
Vehicle Year
1999
Make / Model
FORD
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Automatic
2WD / 4WD
4WD
If I remember right the trany line has a bracket with one bolt on the side of the block that has to come out if you didn't get it out already. I had a similar problem till I found out I didn't remove that bolt but I did have some separation of engine and trans. Just a thought.
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Remove the transmission crossmember and place an expensive item underneath the trans, like your cell phone.

The transmission will fall right out.
 

MikeG

Well-Known Member
Joined
Jul 15, 2020
Messages
1,353
Reaction score
752
Points
113
Location
central Texas
Vehicle Year
1997
Make / Model
B4000
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
2"
Tire Size
235/75r15
Remove the transmission crossmember and place an expensive item underneath the trans, like your cell phone.

The transmission will fall right out.
SOP for government contracts? Our tax dollars at work!
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.

Rowdy Fitzgerald

Hog hunter
Firefighter
EMT / Paramedic
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
Joined
Aug 29, 2008
Messages
2,271
Reaction score
372
Points
113
Location
Nevada
Vehicle Year
1987, 1989
Make / Model
Ford
Engine Type
V8
Engine Size
5.0,4.0
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
6”
Tire Size
35
Just pull the darned thing out with the engine!
 

55trucker

Active Member
Joined
Aug 1, 2016
Messages
602
Reaction score
183
Points
43
Location
Oshawa, Ontario
Vehicle Year
1998
Make / Model
Ford
Engine Type
3.0 V6
Engine Size
3.0L
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
-
Total Drop
mild
What did you use as a source of heat around the dowel pins?

aluminum & steel don't like each other, fit them together (one inside the other) they will corrode, did you use an acetylene torch or a mapp gas kit to heat the area?
 

blbzeckhart

New Member
Joined
Mar 18, 2021
Messages
23
Reaction score
8
Points
3
Age
48
Location
Mocksville, NC 27028
Vehicle Year
1994
Make / Model
Ford Ranger
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Hello, I have a 1994 Ford Ranger, 4.0L OHV, Automatic, 4WD, Vin code X
Truck recently overheated, Coolant problems (all gummed up) Barely runs, blows white smoke cloud, Milky Oil. Def, blown head gasket, or warped Manifold, worse case cracked block. Anyway, decided to replace Motor. I already have the replacement. Exact match. Disassembled all wiring, accesories, ect. Hooked up to Cherry picker, wont separate from Trans. It is thourougly STUCK.
NEED HELP!
Removed all 6 Bell housing bolts from trans to motor.
Removed Starter
Removed all 4 Nuts from Torque Converter to Flex Plate
Supported Trans with jack, lifted Motor, wont separate?
Apparently it is stuck on the 2 Alignment Dowels. I have sprayed with PB blaster, I have tried gently prying on flew plate as I turn it to loosen, I have heated the Dowel Pin area, I cant really get anything in anywhere to pry. Its been married for 27 years to eachother. I have pics and video of what I am up against and what Ive tried.
If anyone has ran into this problem on an older ranger, please let me know what to do. I would have had this motor out 2 weekends ago, if it would have just separated!
*****UPDATE***** - ENGINE IS OUT!!!!!!
So I feel like an Ass. I want to thank everyone for their Help and support on this Journey. I Came home from work today, started prying and shaking everything trying to get this to Separate. My Dad walked over and asked how it was going and I said same shit, but then the light was shining just right and as I stood there talking I saw another bolt? Sure enough, and one to match on the opposite side. WTH? I could never get a definite answer from anyone on how many bolts held the trans to the engine from forums, online, or from the Ford Dealer. I got alot of different answers and I was sure their were only 6. But let me tell everyone following this thread or needs to know for sure, on a 1994 Ranger - 4.0L, Auto, 4WD, OHV Their are 8 bolts that hold it together.
Once I removed the two bolts I found, it immediately and with very little effort separated. The pass side was stuck on the dowel pin but with very little effort I pryed it apart with ease. Lifted it up and out in very little time.
This is one happy Guy tonight!
Thanks again for everyone help and input!!!!
 

Attachments

Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.
Try feeling around. "Your eyes will deceive you, do not trust them"- Obi Wan Kenobi.
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Why do we cook bread twice?
 

Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.

Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.

Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.
*****UPDATE***** - ENGINE IS OUT!!!!!!
So I feel like an Ass. I want to thank everyone for their Help and support on this Journey. I Came home from work today, started prying and shaking everything trying to get this to Separate. My Dad walked over and asked how it was going and I said same shit, but then the light was shining just right and as I stood there talking I saw another bolt? Sure enough, and one to match on the opposite side. WTH? I could never get a definite answer from anyone on how many bolts held the trans to the engine from forums, online, or from the Ford Dealer. I got alot of different answers and I was sure their were only 6. But let me tell everyone following this thread or needs to know for sure, on a 1994 Ranger - 4.0L, Auto, 4WD, OHV Their are 8 bolts that hold it together.
Once I removed the two bolts I found, it immediately and with very little effort separated. The pass side was stuck on the dowel pin but with very little effort I pryed it apart with ease. Lifted it up and out in very little time.
This is one happy Guy tonight!
Thanks again for everyone help and input!!!!
Don't put those ones back. That will teach em. Stupid bolts.
 

Sponsored Ad


Sponsored Ad

Members online

No members online now.

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top