RT PERFORMANCE
New Member
- Joined
- Mar 21, 2017
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Location
- Atlamta Ga.
- Vehicle Year
- 1989 Ranger & a
- Make / Model
- Ford
- Engine Size
- 2.3/ 306. ci
- Transmission
- Manual
- My credo
- i dont say be carefull . why would i tell someone not to have fun?
Hey guys I was wondering if anyone has put a mustang ll IFS under a Ranger. Im building a V8 1989 Ranger. Im going to remove the entire cross member, and twin I-beam set up out from under it. The idea behind that is that it will not only shed quite a few lbs off the nose, but provide better selection of good brakes, better handling, and a over all better ride. Im going to run a motor plate as well. So that will free up a lot of room for some good headers. Along with that set up I will use a Flaming River 23:1 manual rack and pinion for the steering. Im just wondering if anyone has done any leg work on the ride height, and or coil over spring rates.?? Any input is welcome. Or if you can direct me to info in regards to. Thanx RT