Welcome Visitor! Please take a few seconds and 
- Joined
- Feb 11, 2019
- Messages
- 2,953
- Reaction score
- 1,708
- Points
- 113
- Location
- N/A na
- Vehicle Year
- 1990
- Make / Model
- Ford Ranger
- Engine Type
- V8
- Engine Size
- 306, Bcam,
- Transmission
- Manual
- 2WD / 4WD
- 2WD
Has anyone ever worked on GM 4L30E transmissions before?
Its in that 99 isuzu rodeo with the rotten frame. I have an Idea for the engine and trans but I dont need 4x4 and the transfer case is just going to take up space that will be needed. I guess bmw and alot of other cars and trucks used that transmission Im gonna need to change it to 2wd.
Are these completely electrically controlled?
Is this overly complicated to complete?
The bellhousing in pictures ive seen online have all those little channels on the back are there little balls and springs going to fall out?
I have never messed with them so I dont know what will be the simplest thing to do.
Besides burn it and use a c4 and a 5.0......
Its in that 99 isuzu rodeo with the rotten frame. I have an Idea for the engine and trans but I dont need 4x4 and the transfer case is just going to take up space that will be needed. I guess bmw and alot of other cars and trucks used that transmission Im gonna need to change it to 2wd.
Are these completely electrically controlled?
Is this overly complicated to complete?
The bellhousing in pictures ive seen online have all those little channels on the back are there little balls and springs going to fall out?
I have never messed with them so I dont know what will be the simplest thing to do.
Besides burn it and use a c4 and a 5.0......
