LazyTurtle
Member
- Joined
- Jan 5, 2021
- Messages
- 42
- Reaction score
- 10
- Points
- 8
- Location
- Western Washington
- Vehicle Year
- 1993
- Make / Model
- Ford Ranger
- Engine Type
- 4.0 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- Total Lift
- 4 Inch
- Tire Size
- 33x12.5
Hello,
I'm putting full size axles out of a 78 f150 on my 93 ranger.
I have seen people such as @Kyle M. and @XionicWaste extend the stock radius arms to fit their applications.
To me it has seemed like they have only used narrowed D44s and not full size ones, and I'm wondering if I can just extend the stock ones off the 78 and use heims at the end, or would I have to purchase some radius arms from James Duff.
Thank you
I'm putting full size axles out of a 78 f150 on my 93 ranger.
I have seen people such as @Kyle M. and @XionicWaste extend the stock radius arms to fit their applications.
To me it has seemed like they have only used narrowed D44s and not full size ones, and I'm wondering if I can just extend the stock ones off the 78 and use heims at the end, or would I have to purchase some radius arms from James Duff.
Thank you