• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Frustrating .22LR


adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
OK, so I have this old Mossberg .22. The gun is probably in the area of 60 years old. Given the model number and a few other details I have narrowed the production date to probably some time in 1958. Nobody is really sure where it came from except that it belonged to someone in my wife's family, and she took it along with the rest of her late father's guns when she moved out of her mom's house.

Recently I have gotten back into shooting/hunting and I've decided I want to use it. I got a bore-sighter to get the sights close, took it to shoot it last week, 7 misfires in a row with no marks on the casing. Took it home, took it apart, firing pin was broken and I never noticed, because it is not super visible while the gun is fully assembled. No problem, ordered a pin, put it in, recheck the sighting with the laser pointer, go back to the range. 4 misfires in a row, but the casings are slightly dimpled. Inspect again, and there is a spot that looks like wear across from the firing pin. So maybe the chamber is worn, now I need a gunsmith, maybe.

All those misfires were with pretty new Remmington rounds. Went to inspect one to see if maybe I could find a way to get the pin to go father, can't find any of them, they got mixed in with other stuff in the pocket of my hunting vest. So I grabbed a 15 year old, slightly oxidized Federal round out of my vest pocket, put it in, point the gun at a nice soft dirt pile behind the house, and pull the trigger knowing it won't go off, and it goes off.

What gives?
 


Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Guns is goes bang.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15

sgtsandman

Aircraft Fuel Tank Diver
TRS Forum Moderator
U.S. Military - Active
TRS 20th Anniversary
TRS Event Participant
Ham Radio Operator
GMRS Radio License
Joined
Mar 11, 2017
Messages
12,695
Reaction score
12,390
Points
113
Location
Aliquippa, PA
Vehicle Year
2011/2019
Make / Model
Ranger XLT/FX4
Engine Size
4.0 SOHC/2.3 Ecoboost
2WD / 4WD
4WD
Total Lift
Pre-2008 lift/Stock
Tire Size
31X10.5R15/265/65R17
The firing pin channel might be gummed up but that is a wild guess since I’m not familiar with the firearm.
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Go buy some Eley tenex or CCI mini mag. If the gun doesn't fire one of those it's definitely broken...

I gave up on using any other kind of .22lr ammo cause it's a crapshoot.
 

Shran

Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
V8 Engine Swap
Solid Axle Swap
Joined
Mar 4, 2008
Messages
8,637
Reaction score
4,704
Points
113
Location
Rapid City SD
Engine Type
V8
Engine Size
5.0
I'd rule out junk ammo before anything else. And clean up the bolt really well.

My old Remington 597 rifle was super picky about ammo. Some brands would have light strikes 2-3 times before the round would go off. Other ammo ran flawlessly. The Marlins and Rugers I have now will eat just about anything... In fact I used to collect duds on the range that other people threw out.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
I'd rule out junk ammo before anything else. And clean up the bolt really well.
This was one of my thoughts. The Federal rounds being much older may have a thicker base which would be easier to set off.

The pin definitely isn't sticking. I cleaned the bolt very well when I replaced the pin and made sure it can slide freely.

The pin on this gun is just a shaped slab of metal that is fit somewhat loosely in a slot in the bolt and a spring-loaded hammer comes up and smacks it from behind. When I was inspecting the original I accidentally released the action while the bolt was out, so I've had to cycle the hammer by hand and I know how heavy that spring is. I doubt the pin could stick enough to resist it.
 

rumblecloud

Well-Known Member
Supporting Member
Joined
Mar 6, 2020
Messages
1,385
Reaction score
1,106
Points
113
Location
48022
Vehicle Year
1994
Make / Model
Ranger Splash
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
1-1/2 inch front leveling
Total Drop
Stock
Tire Size
31/10.50/15
My credo
What's the worst that could happen?
Which one is it?
Mossberg_ad_circa_1958.JPG
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
None of the above. It's a 346K which I found production dates ranging from 1958 to about 1962 IIRC. Certain details of the gun itself make me tend to believe it is on the earlier end of that spectrum.
 

Sharky

Active Member
Joined
Sep 26, 2020
Messages
181
Reaction score
143
Points
43
Location
PA
Vehicle Year
2020
Make / Model
Ford Ranger
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
did you get a "new" firing pin or a "new used" firing pin ? most of the parts available for old guns are used, so the pin you got may be worn enough so that
it is not hitting all the time.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
did you get a "new" firing pin or a "new used" firing pin ? most of the parts available for old guns are used, so the pin you got may be worn enough so that
it is not hitting all the time.
It was advertised as new reproduction, and I was unable to find any signs of use on it before I installed it.

I'm also now kind of wondering if it just needs broken in a bit.
 

Sharky

Active Member
Joined
Sep 26, 2020
Messages
181
Reaction score
143
Points
43
Location
PA
Vehicle Year
2020
Make / Model
Ford Ranger
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
if you take the bolt out again , check the pin travel to ensure it`s not binding or it needs a bit of clearance (whatever stops pin travel)
to move enough to hit the shell reliably.
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,412
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
It was advertised as new reproduction, and I was unable to find any signs of use on it before I installed it.

I'm also now kind of wondering if it just needs broken in a bit.
I used to think " reproduction" just meant not made by the original manufacturer. After 30 years with my Mustang I now know "reproduction" means looks like a new one and might work, or not.
My father got my 22 by mailing in a cigar box full of the coupons off the back of Raleigh cigarette packs. We got home one afternoon and there was a long skinny cardboard box propped against the mailbox. They sent it through the mail and the mailman left it while we were away. And no one took it or freaked out about it. It would have been in the early to mid 60's.
 

rumblecloud

Well-Known Member
Supporting Member
Joined
Mar 6, 2020
Messages
1,385
Reaction score
1,106
Points
113
Location
48022
Vehicle Year
1994
Make / Model
Ranger Splash
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
1-1/2 inch front leveling
Total Drop
Stock
Tire Size
31/10.50/15
My credo
What's the worst that could happen?
You mean people weren't afraid you were gonna put someone's eye out with that thing?
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
or it needs a bit of clearance (whatever stops pin travel) to move enough to hit the shell reliably.
That may be. Just need to take a file and take a bit off the stop.
 

Sponsored Ad


Sponsored Ad

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top