- Joined
- Dec 29, 2021
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Location
- Columbus
- Vehicle Year
- 1994
- Make / Model
- Ford Ranger
- Transmission
- Manual
Hey guys, I have a 94 super cab and I’m in the process of changing out the leaf hanger on the passenger side. The problem I have is there are a few small rust holes, 1/8th diameter in the fram right on the edge of where the hanger mounts on both sides. My question is, if I weld in a patch with 1/8th plate that spans the entire mounting surface of the hanger, then mount the hanger on that plate. With that 1/8th inch further out affect the leafs or the bushing. Thanks.