Forced induction for the 5.0 Explorer swap

[Nightbiker07]

Most of the 5.0 supercharger kits I see are geared towards carburetor setups.

Does anyone know of one to be used with the explorer injection setup? So little information out there on this topic

 

[franklin2]

All kinds in this link for a 87-up mustang. You might have to get you a mustang intake to make it fit, but that would not be a problem would it? Although I do not know what you would have to do for the accessory drive, it probably is different also.

https://www.cjponyparts.com/mustang-5-0l-supercharger-kits/c/4903/?product_year_mustang=686

 

[fastpakr]

The FEAD definitely complicates things a bit.

 

[Nightbiker07]

The FEAD definitely complicates things a bit.

That is pretty much the exact problem I have been running into, switching to an electric fan would save me some room and I could switch over to the mustang accessory drive provided the AC compressor was in the same spot. I I'm not too familiar with the fox body set up yet.

I plan on switching over to aluminum heads before I go to Forced induction, but after looking at stuff online my brain just sort of started to melt. Hence why I stopped here, was hoping somebody who had done it before could chime in.

 

[Elutheros]

there are cheaper ways to get 50 HP