• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

First time Ranger


hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Hello everyone, my name's Henry! My ride is a 2008 FX4. So, this is not my first truck, but it is the first time I've considered modifying one. My original plan was to use this Ranger for a couple of years until I could afford to get a new/used Colorado ZR2/ZR2 Bison. I decided $3k-$5k to do some mods is a lot cheaper than spending $50k. So naturally after doing some research I have many questions. My first thought was just to go with a 4" Superlift and be done with it. After doing some more research, I decided on replacing torsion keys with pre 2008 keys and cranking them. Then, of course, I ran across the coil over conversion. I've read so many opinions that my head is now spinning! My plan is to put 33s, what is the best option?
29993
 


alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
Welcome to TRS.
How do you use the truck?
How do you use the truck 90% of the time?
What do you want to use the truck for?
 

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Mainly used as my DD. Not a lot of off roading yet but plan on getting out more. Possibly some overland use down the road.
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
I can't help you, my knowledge is with 97 and earlier.
However someone will be along to help you out.
The old rangers are surprisingly capable stock. I would bet yours is too. I'd be inclined to go with the cheapest option to fit 33's.
 

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Sounds good, thanks always. Look forward to everyone's input
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
Another thought;
Depending on present tire size, a gear change may be needed once you go to 33". There are calculators in the "tech section" at the top of every page.
 

Uncle Gump

Token Old Guy
TRS Event Staff
TRS Forum Moderator
Supporting Member
VAGABOND
TRS Event Participant
Joined
Sep 17, 2018
Messages
13,703
Reaction score
13,159
Points
113
Location
Ottawa IL
Vehicle Year
2006/1986
Make / Model
Ranger/BroncoII
Engine Size
4.0L SOHC/2.9L
2WD / 4WD
4WD
My credo
Lead follow or get out of my way
Nice truck and welcome to TRS...

With the earlier torsion keys and rear block installed on your truck... you can get a 32 inch (265/75/16) tire on it with ease... and probably go 33 inch with a little tweaking. On my 06 at factory ride height I clear 32's without a problem and I feel they line up with the factory 4:10 gear nicely. I think If I were to go to 33's I would be looking to change gears to keep it in the sweet spot. Once I get my new bumpers on (they weigh twice what the factory bumpers weigh) and get my cap set up for camping I will evaluate the ride height again. It will probably require a little torsion tweak and I may put my old man emu add a leaf in the rear. My goal is to keep it a close to factory as I can... I don't plan to wheel it... just get me to and from my outdoor adventures.
 

PetroleumJunkie412

Official TRS EV Taunter
Supporting Member
TRS 20th Anniversary
TRS Event Participant
Joined
Oct 31, 2018
Messages
7,826
Reaction score
6,565
Points
113
Location
Dirtman's Basement
Vehicle Year
1988
Make / Model
Ranger
Engine Size
2.9l Trinity
Transmission
Manual
2WD / 4WD
4WD
My credo
Give 'yer balls a tug. Fight me.
Put.
A.
2.9.
In.
It.
 

Oxxon

Active Member
Joined
Apr 21, 2019
Messages
317
Reaction score
51
Points
28
Location
Brownsville, Tx
Vehicle Year
2002
Make / Model
Ford Ranger
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Hello and welcome to TRS!
 

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
Nice truck and welcome to TRS...

With the earlier torsion keys and rear block installed on your truck... you can get a 32 inch (265/75/16) tire on it with ease... and probably go 33 inch with a little tweaking. On my 06 at factory ride height I clear 32's without a problem and I feel they line up with the factory 4:10 gear nicely. I think If I were to go to 33's I would be looking to change gears to keep it in the sweet spot. Once I get my new bumpers on (they weigh twice what the factory bumpers weigh) and get my cap set up for camping I will evaluate the ride height again. It will probably require a little torsion tweak and I may put my old man emu add a leaf in the rear. My goal is to keep it a close to factory as I can... I don't plan to wheel it... just get me to and from my outdoor adventures.
Uncle Gump, thanks for the info.
Nice truck and welcome to TRS...

With the earlier torsion keys and rear block installed on your truck... you can get a 32 inch (265/75/16) tire on it with ease... and probably go 33 inch with a little tweaking. On my 06 at factory ride height I clear 32's without a problem and I feel they line up with the factory 4:10 gear nicely. I think If I were to go to 33's I would be looking to change gears to keep it in the sweet spot. Once I get my new bumpers on (they weigh twice what the factory bumpers weigh) and get my cap set up for camping I will evaluate the ride height again. It will probably require a little torsion tweak and I may put my old man emu add a leaf in the rear. My goal is to keep it a close to factory as I can... I don't plan to wheel it... just get me to and from my outdoor adventures.

Uncle Gump, thanks for the info. If I'm reading the build guide from this site correctly, I have 4.56 gears so I should be good to go with 33', correct? I have been looking into the old torsion keys and bigger blocks. Wulf Suspension has a kit for around $300 that includes Wulf branded shocks. They also sell the same kit with Bilstein shocks for about $525. Should I go for the kit with the Billsteins?
Like your idea about getting to camping spots as my in-laws are retired and like to fish and camp and we are planning to join them some wekends.
 

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
You saying swap my 4.0 to a 2.9? Only had 98k on it when I bought it.
PJ is the local (xxx xxx) that thinks 2.9 are gods gift to ford. Its a running joke between members. Looks like you're in the "in" crowd. It also doesn't take much to get put on his "list". lol.
 

hmalopez

New Member
TRS 20th Anniversary
Joined
Jul 25, 2019
Messages
14
Reaction score
0
Points
1
Age
55
Location
NM
Vehicle Year
2008
Make / Model
Ford/Ranger FX4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
PJ is the local (xxx xxx) that thinks 2.9 are gods gift to ford. Its a running joke between members. Looks like you're in the "in" crowd. It also doesn't take much to get put on his "list". lol.
Haha, got it! Uh "glad" to be in?
 

PetroleumJunkie412

Official TRS EV Taunter
Supporting Member
TRS 20th Anniversary
TRS Event Participant
Joined
Oct 31, 2018
Messages
7,826
Reaction score
6,565
Points
113
Location
Dirtman's Basement
Vehicle Year
1988
Make / Model
Ranger
Engine Size
2.9l Trinity
Transmission
Manual
2WD / 4WD
4WD
My credo
Give 'yer balls a tug. Fight me.

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top