ol'blue
New Member
- Joined
- Jun 22, 2011
- Messages
- 2
- Reaction score
- 0
- Transmission
- Automatic
Hello I am new here and have been looking all over the internet for some help.
I have picked up a 1988 Ranger for free it is in great shape except the crank shaft bearing is blown. I have a 1990 Mustang engine that I hope will fit in the ranger. Both engines are 4 cylinder 2.3L. Will this work? I am wanting to do it because both the engine and truck were free and I need an old truck to get me from A to B for work. Has anyone done this or something similar? A friend of mine said this would work but I just want to make sure before I attempt it. Any advise would be great.
Thanks alot.
I have picked up a 1988 Ranger for free it is in great shape except the crank shaft bearing is blown. I have a 1990 Mustang engine that I hope will fit in the ranger. Both engines are 4 cylinder 2.3L. Will this work? I am wanting to do it because both the engine and truck were free and I need an old truck to get me from A to B for work. Has anyone done this or something similar? A friend of mine said this would work but I just want to make sure before I attempt it. Any advise would be great.
Thanks alot.