Do I have the right bulbs for dash?

[James Morse]

I was watching vid on how to change out dash bulbs, and they say for Ranger 93-03 the bulbs have quarter-turn to lock, they are mounted in a plastic base. But the ones I have are just bulbs with no mounting. Do I have the right ones for my truck? I don't want to get the whole thing apart then end up with wrong part, that would suck. I have Sylvania Silverstar #194, that's what the parts store said I need. They don't look like the ones in the vid (no base on mine). Here's the vid I watched:

the rest of it apart from bulbs themselves looks just like mine, I've had most of it apart before, just not the dash cluster out, yet.

 

[RonD]

Yes, the bulb socket is removed by the 1/4 turn, then you pull out the old bulb and put in the new one, then re-install

Stock bulbs are "incandescent" type, so have no dedicated + and - side
LED replacement do, so they have to be installed the correct way, so power up the dash before putting back in to make sure all 6 are working, you should do that with either type of bulb, lol

 

[James Morse]

Oh, ok. Thanks RonD. Sounds like I'm good to go.

 

[DILLARD000]

BackLamps
LitBulbs T10mmWedg*23mmLong 12volt 3\4watt Sylvania# 161\194
Sockets T10mmWedg*13mmCircuitHoleMt FordMotorCraft# c80z-13711-b
* Do Not Use Higher Wattage Bulbs, They Will Melt Plastic Sockets
* 6each In DashLeft InstrumentCluster
* 2each In DashCenter AirConSelectors

DutyLamps
LitBulbs T5mmWedg*18mmLong 12volt 9\13watt Sylvania# 906\912
Sockets T5mmWedg*7mmCircuitHoleMt FordMotorCraft# f57z-13b765-ba
* Do Not Use Higher Wattage Bulbs, They Will Melt Plastic Sockets
* 16each In DashLeft InstrumentCluster
* 2each In DashCenter 4WD+RearWindowSelectors, Sockets Require Mod\Add

Click here for more info.