msasasgs
New Member
- Joined
- Aug 16, 2020
- Messages
- 7
- Reaction score
- 2
- Points
- 3
- Location
- NC
- Vehicle Year
- 2005
- Make / Model
- Ranger 3.0 STX
- Engine Type
- 3.0 V6
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
2005 STX V6 3.0 Vulcan engine
Just noticed on my Torque app my Ranger's timing varies between 6º on start-up, moving to around 18º after about 30 seconds at idle. It shows 24º when coasting and 38º when running under a light load. The manual says "not adjustable" which is OK if these readings are normal.
The Cam Position Sensor was replaced about 3000 miles ago.
Any input would be appreciated
Just noticed on my Torque app my Ranger's timing varies between 6º on start-up, moving to around 18º after about 30 seconds at idle. It shows 24º when coasting and 38º when running under a light load. The manual says "not adjustable" which is OK if these readings are normal.
The Cam Position Sensor was replaced about 3000 miles ago.
Any input would be appreciated