ibmp200
New Member
- Joined
- May 26, 2021
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Location
- Salem
- Vehicle Year
- 2007
- Make / Model
- Ranger
- Engine Type
- 4.0 V6
- Engine Size
- Four liter V6
- Transmission
- Automatic
This is in regards to a 2007 ranger with 4 liter v6 engine. four wheel drive and short bed. i want to do some customization work on the brake lines coming out of the hydraulic control unit for four wheel anti lock brakes; in the attached picture.
i am looking to find out the sizes of the connectors in each five circles here. the two at the bottom go to the front left and right wheels. the singular one at the right goes to the rear axle, that splits to both rear wheels. the two at the top of course, come from the master cylinder. tell me please what the sizes of all five of these are. thank you.
i am looking to find out the sizes of the connectors in each five circles here. the two at the bottom go to the front left and right wheels. the singular one at the right goes to the rear axle, that splits to both rear wheels. the two at the top of course, come from the master cylinder. tell me please what the sizes of all five of these are. thank you.