Fozwanger
New Member
- Joined
- Nov 17, 2020
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Location
- Cutting01
- Vehicle Year
- 2005
- Make / Model
- ranger 2wd
- Transmission
- Manual
Hi everyone, I'm new to Rangers and I'm about to buy a 2005 2WD ranger to work on, the models here in the uK have 6 stud hubs, are there any 5 stud hubs that are a direct swap (eg SN95 mustang?)
If so, what do I need to be looking out for?
Or would it be easier to swap the complete strut / leg for something else that bolts straight on?
I also want to lower it but can't afford to bag it ATM, are there coilover conversions available?
What rear axle will it have? I'm gpoing to be fitting a 400 hp Jag supercharged Jag V8 next year so I need a strong one, as this is a 2.4 N/A diesel, what axlewill it have?
Thanks in advance
Jeff
If so, what do I need to be looking out for?
Or would it be easier to swap the complete strut / leg for something else that bolts straight on?
I also want to lower it but can't afford to bag it ATM, are there coilover conversions available?
What rear axle will it have? I'm gpoing to be fitting a 400 hp Jag supercharged Jag V8 next year so I need a strong one, as this is a 2.4 N/A diesel, what axlewill it have?
Thanks in advance
Jeff