• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Convert fuel pump over to electric from mechanical


lightningrod

Member
Joined
May 14, 2021
Messages
30
Reaction score
9
Points
8
Location
Washington
Hello All,
My 1988 is a hybrid deal, it's a 2.3l with a Weber 32/36 and a mechanical fuel pump.
I'm considering converting to an electric fuel pump.
Wondering what folks have used for electric pumps for a carb, which is low pressure, something like 4~~6 psi.
If it's outside the fuel tank I would try to mount it as low as possible, for priming.
I would be interested in a low pressure, in-tank pump, if there was one.
Thanks much
 


superj

Well-Known Member
U.S. Military - Veteran
Joined
Oct 1, 2021
Messages
3,030
Reaction score
2,501
Points
113
Location
corpus christi, texas
Vehicle Year
2004
Make / Model
ranger edge
Engine Type
3.0 V6
Engine Size
3 liters of tire smoking power
Transmission
Manual
2WD / 4WD
2WD
Total Lift
none
Total Drop
none
Tire Size
235s
My credo
Grew up in the 70s, 80s, and 90s
You can use a holley low pressure electric pump with a regulator to reduce it more, since holley carbs run higher psi than webers. That what I had to do
 

Uncle Gump

Token Old Guy
TRS Event Staff
TRS Forum Moderator
Supporting Member
VAGABOND
TRS Event Participant
Joined
Sep 17, 2018
Messages
13,704
Reaction score
13,160
Points
113
Location
Ottawa IL
Vehicle Year
2006/1986
Make / Model
Ranger/BroncoII
Engine Size
4.0L SOHC/2.9L
2WD / 4WD
4WD
My credo
Lead follow or get out of my way
I've used Holley blue pumps but you can use a Holley red pump also. You will want a regulator with either.

I would not cheap out on the regulator...
 

lightningrod

Member
Joined
May 14, 2021
Messages
30
Reaction score
9
Points
8
Location
Washington
I figured the Holley "race" pumps were all way too much pump for a 2.3.
I do agree about the regulator. I believe in Aeromotive.
I thought Carter made some smaller pumps.
 

superj

Well-Known Member
U.S. Military - Veteran
Joined
Oct 1, 2021
Messages
3,030
Reaction score
2,501
Points
113
Location
corpus christi, texas
Vehicle Year
2004
Make / Model
ranger edge
Engine Type
3.0 V6
Engine Size
3 liters of tire smoking power
Transmission
Manual
2WD / 4WD
2WD
Total Lift
none
Total Drop
none
Tire Size
235s
My credo
Grew up in the 70s, 80s, and 90s
I always used holley for the pump and regulator. I don't remember which model though.
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
Why not a stock in tank lift pump from an 86 or 87 ranger? I thought 88 had them too....
 

lightningrod

Member
Joined
May 14, 2021
Messages
30
Reaction score
9
Points
8
Location
Washington
Lift pumps were for EFI, I think I read they're not really robust enough as a stand alone carb pump.
 

superj

Well-Known Member
U.S. Military - Veteran
Joined
Oct 1, 2021
Messages
3,030
Reaction score
2,501
Points
113
Location
corpus christi, texas
Vehicle Year
2004
Make / Model
ranger edge
Engine Type
3.0 V6
Engine Size
3 liters of tire smoking power
Transmission
Manual
2WD / 4WD
2WD
Total Lift
none
Total Drop
none
Tire Size
235s
My credo
Grew up in the 70s, 80s, and 90s
Not a lift pump. They will go out fairly quick, generally, if used as the primary pump
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,870
Reaction score
5,030
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
Interesting, never read that before, but never needed to use a carb either.
 

RonD

Official TRS AI
TRS Technical Advisor
Joined
Jun 2, 2012
Messages
25,291
Reaction score
8,296
Points
113
Location
canada
Vehicle Year
1994
Make / Model
Ford
Transmission
Manual
Mechanical pump run $30-$40, and is very reliable, also fairly easy to change

So question is WHY?
Would you want to change to electric?

Costs more and adds at least 2 more wires to the system
AND can be a safety concern unless you add inertia switch and/or oil pressure switch

In an accident, no one plans it, which is why it is called an accident and not an "on purpose", lol
So in an accident if a fuel line should break an electric pump just keeps on pumping until battery dies, which could/would feed a fire
Which is why there are inertia switches and 0 RPM shut off for all fuel injected vehicles

In the older carb vehicles with electric pumps they used oil pressure switch as the ground for electric fuel pump
Simple setup, and if engine has 0 oil pressure then pumps shuts off
Broken fuel line means engine shuts off, so 0 oil pressure
 

Bronco648

Active Member
Joined
May 23, 2019
Messages
414
Reaction score
102
Points
43
Location
Chicago-land, Illinois
Vehicle Year
2011
Make / Model
XL
Engine Type
2.3 (4 Cylinder)
Engine Size
2.3
Transmission
Automatic
2WD / 4WD
2WD
Tire Size
15"
I was contemplating an electric pump for my '85 RCLB Duraspark conversion. The people that rebuilt the carb for me recommend 3 psi fuel pressure.

Mechanical pump run $30-$40, and is very reliable, also fairly easy to change

So question is WHY?
Would you want to change to electric?

Costs more and adds at least 2 more wires to the system
AND can be a safety concern unless you add inertia switch and/or oil pressure switch

In an accident, no one plans it, which is why it is called an accident and not an "on purpose", lol
So in an accident if a fuel line should break an electric pump just keeps on pumping until battery dies, which could/would feed a fire
Which is why there are inertia switches and 0 RPM shut off for all fuel injected vehicles

In the older carb vehicles with electric pumps they used oil pressure switch as the ground for electric fuel pump
Simple setup, and if engine has 0 oil pressure then pumps shuts off
Broken fuel line means engine shuts off, so 0 oil pressure
You bring up excellent points and I may stick with the mechanical pump. Does anyone know the psi output of a mechanical pump? And, where to mount the regulator?
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top