• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Code reader and Loping problem

Momboy007

New Member
Joined
Oct 12, 2011
Messages
15
Reaction score
0
Points
0
Vehicle Year
1987
Make / Model
Ford
Transmission
Manual
Hello All,
I need to purchase a code reader for my 87 2.3 FI. Where would be a good place to purchase one? Also, It seems this little truck sputters occasionally and then also lopes from time to time. It has a low RPM miss as well, when I fully floor the truck it seems to have good power with no miss, just does not want to seem to run correctly going through the gears normally.
Any help would be greatly appreciated

Rick
 


Rock Auto 5% Discount Code: BD8D9A3814E19D Expires July 5th, 2022

scotts90ranger

Well-Known Member
RBV's on Boost
Joined
Feb 28, 2001
Messages
6,081
Reaction score
1,505
Points
113
Location
Dayton Oregon
Vehicle Year
1990, 1997
Make / Model
Ford
Engine Type
2.3 (4 Cylinder)
Engine Size
2.3 Turbo
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6
Tire Size
35"
you don't need a code reader, go HERE and connect the jumper it mentions in the image about half way down, you don't need the volt meter (if you decide to use one it has to be an analog one) just put the jumper on and sit in the cab and turn on the key, count the flashes of the check engine light
 

Sponsored Ad


Sponsored Ad

Top