stuart362
New Member
- Joined
- Apr 11, 2020
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- Rochester, WA
- Vehicle Year
- 1991
- Make / Model
- Ford Ranger
- Transmission
- Manual
Hey all. New here, so let me know if I’m doing something wrong.
I bought my 91 a while ago, and it had a leaking slave cylinder. I replaced the slave, throw out bearing, clutch plate and pressure plate. Bled the system, and everything was great for a week. After driving it about 200 miles total, something went wrong and now I can’t get it into 1st/Reverse. Tried bleeding it more, with a vacuum pump, checked the master cylinder, and can’t find any issues. There’s no leak, and the clutch pedal feels okay. Any ideas?
91 Ranger, 4x4, 4.0L, 183k.
I bought my 91 a while ago, and it had a leaking slave cylinder. I replaced the slave, throw out bearing, clutch plate and pressure plate. Bled the system, and everything was great for a week. After driving it about 200 miles total, something went wrong and now I can’t get it into 1st/Reverse. Tried bleeding it more, with a vacuum pump, checked the master cylinder, and can’t find any issues. There’s no leak, and the clutch pedal feels okay. Any ideas?
91 Ranger, 4x4, 4.0L, 183k.