ZachsA9
New Member
- Joined
- Nov 11, 2020
- Messages
- 6
- Reaction score
- 0
- Points
- 1
- Location
- Wisconsin
- Vehicle Year
- 97
- Make / Model
- Ford ranger
- Transmission
- Manual
Hi I just just joined today but I read on one of the articles that a couple people here where having trouble finding the bolt that holds the radius arm to the i-beams, and the front coil springs all together, since I just rebuilt my 97 ranger 2wd regular cab I thought I would help, the bolt I used is a 3/4 inch x 8 inch #10 thread grade 8 hex bolt , the original that the truck calls for is a 3/4 inch-10x 7 3/4 inch bolt, if your using the original i-beams from the truck , the bolt is probably fused to the i-beams, so you will only be able to get the top nut off, the nut is 11/8 inch socket and a long torque wrench set as high as it will go or a very long breaker bar to bust it loose,