Welcome Visitor! Please take a few seconds and 
96Greenster
New Member
- Joined
- Jun 1, 2009
- Messages
- 324
- Reaction score
- 0
- Points
- 0
- Location
- Rio Grande City
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Automatic
The previous owner swapped the engine from a newer ranger. This is a 99 Ranger 4.0L with newer 4.0L engine. Ive herd that newer dont have IAT sensors on the intake tube
...Ok, So I went to autozone to get my CEL codes and got just one, according to the guy it was the "AIT" sensor, ok, so I looked for the IAT wire on the truck and found nothing...So how would I connect the IAT sensor thats on the intake tube from the previous engine? Im confused so not sure if I make sense of what im trying to say.
Let me know what u think
...Ok, So I went to autozone to get my CEL codes and got just one, according to the guy it was the "AIT" sensor, ok, so I looked for the IAT wire on the truck and found nothing...So how would I connect the IAT sensor thats on the intake tube from the previous engine? Im confused so not sure if I make sense of what im trying to say. Let me know what u think
