- Joined
- Jan 14, 2009
- Messages
- 795
- Reaction score
- 11
- Points
- 18
- Location
- SoCal
- Vehicle Year
- 2003
- Make / Model
- Ford/EDGE
- Engine Size
- 3.0
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 4.5" SL
- Total Drop
- WWWhhhaaattt !?!
- Tire Size
- 33 x 12.50
As some of you know I am in the middle of a Custom 4x4 Fabrication (C4x4) Rear Steppie bumper Project.
I have been working with C4x4 on this bumper for about 6 months and it is now in the finish stage of fitting.
I am at the point in the project to consider what color I will be painting the bumper.
Was going to do Line-X but not as this time so my color choice is easy, BLACK.
Question is what level of gloss will look the best.
I am thinking something less than a semi-gloss but not flat.
I started a poll just to get an idea from other Ranger owners.
thanks
This isn’t the finished position for the bumper, needs to be raised 1/25”, new brackets are on their way and should finish the project.
Customer 4x4 Fabrication is a great place to deal with, Mike is easy to talk to for mods and his quality is good.
the bumper after last fitting:
I have been working with C4x4 on this bumper for about 6 months and it is now in the finish stage of fitting.
I am at the point in the project to consider what color I will be painting the bumper.
Was going to do Line-X but not as this time so my color choice is easy, BLACK.
Question is what level of gloss will look the best.
I am thinking something less than a semi-gloss but not flat.
I started a poll just to get an idea from other Ranger owners.
thanks
This isn’t the finished position for the bumper, needs to be raised 1/25”, new brackets are on their way and should finish the project.
Customer 4x4 Fabrication is a great place to deal with, Mike is easy to talk to for mods and his quality is good.
the bumper after last fitting:
Last edited: