beam drop brackets!!! help

[lethal-threat-b288]

is there anybody who can or know of anybody that can either make or fab some beam drop brackets for a 6 inch lift, i am goin to put a d35 in from a d28 and the lift plate will be too close to the carrier housing... any ideas are greatly apreciated thanx

 

[ThatGuy]

You can buy those from one of the many lift companies. Just be sure to get a drop bracket and not a drop plate. The plate is what causes the busted pigs.

 

[lethal-threat-b288]

lke what companies do it? i dont ant it to be too too $$$$$$$$, that stuff is few and far between nowadays.

 

[np205]

Skyjacker, look in the store or on summit you can source parts of lifts like springs and such

 

[Black_Splash]

http://www.trsfabandoffroad.com/products/skyjacker_brackets.htm

 

[The_Dealer]

summit dont list it on their site, but if u enter a tuff country part number it shows up, about 80 bux cheaper then the sj

 

[99RangerKrazy]

You can get some 4" Tuff Country drop brackets from suspensionconnection.com . Every once in a while they have a pretty good sale and you can get them cheap.