Treside
New Member
- Joined
- Aug 13, 2020
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Location
- Dacono Colorado
- Vehicle Year
- 1989 88 91
- Make / Model
- Ford ranger
- Transmission
- Manual
So I am currently rebuilding a late 80s 2.9 not really sure what year it is at this point but I installed new pistons on old rods and I have the rod for the number 1 cylinder and the number 4 cylinder rods in backwards am I asking for trouble if I just switch the 2 so that the oil hole is in the right spot instead of pressing them back out (again I am on my second set of pistons bc I did this once already and ended up breaking one of the skirts on the first set)