cloonane
New Member
- Joined
- May 7, 2009
- Messages
- 15
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1996
- Make / Model
- mazda
- Transmission
- Manual
hi guys
well i just did a brake job on my 96 b4000 4x4, that went good, while doing the brakes i also replace the rotors,drums,rear brake cylinders and the ujoint on the drive axel front pass.. side.
here is the issue abs light comes on as soon as i start the vehicle and stays on. also after the vehicle has been sitting for awhile when i come out to start it and put my foot on the brake it is hard as a rock no give at all until the vehicle is started. any ideas as to what i need to do to solve this problem?
thanks
well i just did a brake job on my 96 b4000 4x4, that went good, while doing the brakes i also replace the rotors,drums,rear brake cylinders and the ujoint on the drive axel front pass.. side.
here is the issue abs light comes on as soon as i start the vehicle and stays on. also after the vehicle has been sitting for awhile when i come out to start it and put my foot on the brake it is hard as a rock no give at all until the vehicle is started. any ideas as to what i need to do to solve this problem?
thanks
Last edited: