LazyTurtle
Member
- Joined
- Jan 5, 2021
- Messages
- 42
- Reaction score
- 10
- Points
- 8
- Location
- Western Washington
- Vehicle Year
- 1993
- Make / Model
- Ford Ranger
- Engine Type
- 4.0 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- Total Lift
- 4 Inch
- Tire Size
- 33x12.5
Hello,
I have a 1993 Ranger with an A4LD and the electric transfer case.
I've done some research about what transmissions to swap in, I just had a few questions about everything that would be needed for the swap.
Basically my questions were if the transfer case I have would hook right up to the transmission easily, how the pedal mounts inside of the truck since I have an automatic, and if there was a punch out plate for where the lever would go.
I was also interested in putting a manual t-case since the shift motor has had problems on my truck, and what swapping that over would entail.
Thanks
I have a 1993 Ranger with an A4LD and the electric transfer case.
I've done some research about what transmissions to swap in, I just had a few questions about everything that would be needed for the swap.
Basically my questions were if the transfer case I have would hook right up to the transmission easily, how the pedal mounts inside of the truck since I have an automatic, and if there was a punch out plate for where the lever would go.
I was also interested in putting a manual t-case since the shift motor has had problems on my truck, and what swapping that over would entail.
Thanks