Welcome Visitor! Please take a few seconds and Chris_1
Well-Known Member
- Joined
- Feb 1, 2009
- Messages
- 88
- Reaction score
- 1
- Vehicle Year
- 1994
- Make / Model
- Ford
- Transmission
- Automatic
Hi guys, wondering if someone with a little trans knowledge can help out here. "somebody" took out the servos on my '89 A4LD to get new ones but forgot to mark what camer out of which hole. Ive got an AB and a BB, a Big spring and a smaller spring.
Best as I can figure out, the AB (bigger bore) is for the overdrive (front) servo and being a bigger piston would take the bigger (orange) release spring.
That leaves the BB (smaller bore) and lighter (green) spring for the intermediate, or rear servo hole.
Is that the correct placement ? Or have I got everything mixed up and backwards ? Appreciate any help I can get on this one.
Best as I can figure out, the AB (bigger bore) is for the overdrive (front) servo and being a bigger piston would take the bigger (orange) release spring.
That leaves the BB (smaller bore) and lighter (green) spring for the intermediate, or rear servo hole.
Is that the correct placement ? Or have I got everything mixed up and backwards ? Appreciate any help I can get on this one.
