• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

'99 xlt 4x4 auto 3.0 v6 to 5.0l v8 swap


Joined
Mar 10, 2015
Messages
2
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
So I've been pondering this swap for the last month or so stalking this forum and looking at readily available info. From what I understand my year of ranger is the easiest to swap if I use the same year of explorer. My question is what do I all have to swap across? I know you have the engine and the PCM of course along with the motor mounts, transmission, radiator and hose, fan and shroud, a/c hoses, battery cable harness, throttle cable, cruise cable, high pressure power steering hose, exhaust manifolds, catalytic converter, airbox, MAF, zip tube, and fuel pressure regulator. Is there anything else I MUST swap across. I haven't found any additional info like what wiring I have to swap if any at all or if I'll have to re-gear my axles or totally swap them ect. ect.... Anybody care to shed some light?
 


Rock Auto 5% Discount Code: F9A1A579ACFAD1: October 1st, 2021
Joined
Mar 10, 2015
Messages
2
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
I've read the ladder one the first link looks pretty helpful too thank you!
 


Top