spenc_e_22
New Member
- Joined
- Sep 11, 2010
- Messages
- 1
- Reaction score
- 0
- Transmission
- Automatic
My 96 ranger diver door will not open. i recently repaired one of the three bolts that hold the locking mech. to the door. (the two top screws were gone. The only thing holding it on was one bolt on the bottom. So i put a replacement bolt in one of the top holes.)
So now it is stuck for some reason. Neither handle will work and i have the door panel off. I've tried cleaners and leveraging the door in many directions.
Any suggestions.
So now it is stuck for some reason. Neither handle will work and i have the door panel off. I've tried cleaners and leveraging the door in many directions.
Any suggestions.