Cody_allred
New Member
- Joined
- Apr 12, 2021
- Messages
- 8
- Reaction score
- 0
- Points
- 1
- Location
- asheboro NC
- Vehicle Year
- 1995
- Make / Model
- Ford Ranger
- Transmission
- Manual
My name is cody. i have a 95 ford ranger 2.3 4cyl manual ranger. recently it has sat for 2 months to get my exhaust straight piped and to delete egr and dpfe. upon putting everything back together the ranger will not keep running, new fuel pump, pressure reg, and filter. new coil packs plugs and wires, timing is right, and fuel pressure is good. and yes i have tested the inertia switch and it is perfectly fine. i have tried running codes but there are no codes to display. Starts and runs for about 3 seconds then stalls out i can give it gas to prolong the running but it still tries dying when i give it gas. PLEASE HELP...