For Sale 95 Ranger 2WD Parts

[smilinjack]

I still have the COMPLETE drivetrain (perfect running condition) including 4.0 V6, 5spd manual trans, 3.55 posi rear(complete unit incl. leaf springs) , and ALL suspension parts. (TIB) The truck was lowered 2" so these suspension parts are are for that application. Complete pwr steering (abs) unit including drag links. Have brand new rotors/calipers (loaded) never been used. I have TOTALLY stripped down this perfectly running truck to install a race package. So ANY parts you may need are still available and in working order. This truck was well cared for but I only wanted the sheet metal and the frame. Willing to give a great deal on the whole package.

 

[NakedDucks]

Location?

 

[smilinjack]

about 25 miles north of Detroit

 

[thcscubajohn]

Can I buy the fuel lines?

 

[thcscubajohn]

Hello, can I buy the transmission slip yoke?

 

[smilinjack]

sorry about the delayed response. Been really busy on my rebuild. Don't have the fuel "lines". Just the fuel tank. Right now I've got the old parts all over hell's half acre so I won't be parting out stuff for a while. If ya wanted the entire drive train I would probably interrupt my rebuild for that. Other than that it will probably be springtime before I start parting out. Sorry, good luck with your project.

 

[thcscubajohn]

sorry about the delayed response. Been really busy on my rebuild. Don't have the fuel "lines". Just the fuel tank. Right now I've got the old parts all over hell's half acre so I won't be parting out stuff for a while. If ya wanted the entire drive train I would probably interrupt my rebuild for that. Other than that it will probably be springtime before I start parting out. Sorry, good luck with your project.

No worries, I've got someone else on here selling me a yoke. I also found fittings to convert the metric fuel rail fittings to -06 AN. So I'm good there too, thank you anyway.

 

[turbo91xlt]

Hi there, I am looking for the pair of brackets that mount the front swaybar end links to the TIB suspension. Thanks!

 

[smilinjack]

Hey Turbo.. Wouldn't you know it, 2 days ago I went to the scrap yard to dispose of my '95 parts that were just cluttering my work space.
And, of course, included in that pile was the PS box, drag link, tie rods and sway bars and brackets!!! I still have the drivetrain components AND in case youre thinkin about doing your brakes, I've got brand new rotors and brand new calipers already loaded. They've never touched the ground and they are presently mounted on "dropped" I beams (I think 2"). Also an 8.8 rear axle with 3.55 posi that still has the "drop" leaf springs to match still on the axle.
When I started my project I was convinced I was going to stay with the TIB and just stuff the Cleveland in it. WRONG!! But I had pre purchased a bunch of stuff for the original thought. So, I don't know where ur goin with your project but, I've got all this stuff just hangin around.. Just sayin ... good luck with your project, hope you enjoy yours as much as I'm enjoying mine!

 

[Foofur]

still have the spindles and I beams?

 

[smilinjack]

yes

 

[dmperkins01]

driver side valve cover? mine is rusted out.

 

[smilinjack]

Sorry, the entire drivetrain is in very good working order so I’m not really parting out engine, trans, rear axle assy. Good luck tho.

 

[harleyron]

I still have the COMPLETE drivetrain (perfect running condition) including 4.0 V6, 5spd manual trans, 3.55 posi rear(complete unit incl. leaf springs) , and ALL suspension parts. (TIB) The truck was lowered 2" so these suspension parts are are for that application. Complete pwr steering (abs) unit including drag links. Have brand new rotors/calipers (loaded) never been used. I have TOTALLY stripped down this perfectly running truck to install a race package. So ANY parts you may need are still available and in working order. This truck was well cared for but I only wanted the sheet metal and the frame. Willing to give a great deal on the whole package.

Rear end?

 

[smilinjack]

Rear end?

Yes. It’s a 3.55 posi, it is set up right now with spring under axle for a drop (leafs still attached.