• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' the posts that you read.

94 v6 Ranger with auto hubs swap to 1980's manual hubs?


Natedog

New member
Joined
Aug 7, 2007
Messages
917
Reaction score
5
Points
0
Location
CA
Vehicle Year
87
Make / Model
Ranger
Transmission
Manual
My friend's 94 v6 Ranger with auto hubs wore out the auto locking junk, can we swap to 1980's manual hubs? If so, what advice and/or special parts do we need?
 


Rock Auto 5% Discount Code: 4FF3E9EEA14805 Expires: October 1st, 2020

Hahnsb2

New member
TRS Banner 2010-2011
Joined
Aug 8, 2007
Messages
4,416
Reaction score
36
Points
0
Age
31
Location
Battle Ground WA
Vehicle Year
88-95
Make / Model
Ford-Dodge
Engine Size
4.0-5.2 Turbo
Transmission
Manual
No an 80s RBV will have a D28 and his is a D35. You need the hubs, washers and wheel bearing nuts.
 

Natedog

New member
Joined
Aug 7, 2007
Messages
917
Reaction score
5
Points
0
Location
CA
Vehicle Year
87
Make / Model
Ranger
Transmission
Manual
Hahn's you're correct on that. :D Sorry I'll correct my question :) ....will an early 90's D35 manual hubs and all fit? If so, what advice and/or special parts do we need?

Thinkin they will fit and that we'll still need the hubs, washers, and wheel bearing nuts...
 

4x4junkie

Forum Staff Member
Forum Moderator
TRS 20th Anniversary
Joined
Aug 19, 2001
Messages
10,408
Reaction score
270
Points
83
Location
So. Calif (SFV)
Vehicle Year
1990
Make / Model
Bronco II
Engine Type
2.9 V6
Engine Size
2.9L V6
Transmission
Manual
2WD / 4WD
4WD
Tire Size
35x12.50R15
If they're 27 spline D35 hubs, they should fit.

You need the hubs, and the spindle (wheelbearing) locknuts.
 

Natedog

New member
Joined
Aug 7, 2007
Messages
917
Reaction score
5
Points
0
Location
CA
Vehicle Year
87
Make / Model
Ranger
Transmission
Manual
Thank you all! :)
 


Top