Wanted 83-92 firewall section, blower port area from cowl to below blower

[corerftech]

I have some rust...... cancer is better........ completely dead flesh....

Need a section from an 83-92 ranger, the blower port as far right as just past the heater core hose ports, as high as 2 inches above the top edge of the blower gasket.
Top pic is roughly what I need and I wont be picky! The bottom pic is for perspective

 

[2 bronco 11s]

I am sending 2 pictures. You get into the dash structure when you get to the seam. It would have to be cut out with a cut-off wheel. It could be cut pretty close to where it is attached to the firewall. Downward and past the heater hose shouldn't be much of a problem.

 

[corerftech]

great pics, thank you.
You basically announced how bad this will suck. LOL

I have some steel now….. it may become just a patch job.

I really didn’t need rust in this location.
Appreciate the photos. Complicated spot

 

[2 bronco 11s]

Your welcome. Good luck.

 

[IHaveATruck]

I have some rust...... cancer is better........ completely dead flesh....

Need a section from an 83-92 ranger, the blower port as far right as just past the heater core hose ports, as high as 2 inches above the top edge of the blower gasket.
Top pic is roughly what I need and I wont be picky! The bottom pic is for perspective


View attachment 72586

View attachment 72587

Where are you located? I've got an 89 single cab that I'm parting out. Cab is in pretty good shape overall. Not sure how the rest of yours is.

 

[corerftech]

Memphis TN