LOWnEASY
New Member
- Joined
- Nov 8, 2019
- Messages
- 13
- Reaction score
- 0
- Points
- 1
- Location
- Clarksville Arkansas
- Vehicle Year
- 82
- Make / Model
- Ford ranger 4x4
- Transmission
- Manual
New here, as I mostly do ls swaps and gm applications. I had a customer come to me to finish a swap he had some one els start, and we all know how it is going behind others wiring projects.
To start it's an 82 ranger originally 2.9
Original rangerb5 speed
2000 explorer 4.0 and harness.
And 96 computer (not sure if ranger or explorer)
To me, it sounds easier to make the 4.0 harness standalone, but information on this seems scarce.
I have identified, the pcm pinouts are yellow for constant, red for switched, and blk/w for ground.
The only thing I can't find a pinout for Is the 42 pin connector on the driver side valve cover. Any help here would be appreciated.
To start it's an 82 ranger originally 2.9
Original rangerb5 speed
2000 explorer 4.0 and harness.
And 96 computer (not sure if ranger or explorer)
To me, it sounds easier to make the 4.0 harness standalone, but information on this seems scarce.
I have identified, the pcm pinouts are yellow for constant, red for switched, and blk/w for ground.
The only thing I can't find a pinout for Is the 42 pin connector on the driver side valve cover. Any help here would be appreciated.
Last edited: