- Joined
- Aug 6, 2007
- Messages
- 3,843
- Reaction score
- 1,682
- Points
- 113
- Location
- Macon/Fort Valley, GA
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Type
- V8
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
HELP! I need a set of front spring towers for a 68-79 F-100/150 4x4. 68-72 would be preferred, but I think I can make the 73-79 towers work as well with a little work.
This isn't for a Ranger, it's for my 68 F-100, but I know a lot of people used these parts for SAS swaps in the past. My passenger side tower cracked apart and is barely hanging onto the frame, and the driver side is cracking in the same locations. This cracking and failure was caused by modifications made by previous owner for a mild lift, not simply stock parts failing.
Truck is unsafe to drive as is and parked until I can source replacements. Hoping someone might have a set on the shelf collecting dust or can find a set for me, cause I'm not having any luck sourcing them locally.
This isn't for a Ranger, it's for my 68 F-100, but I know a lot of people used these parts for SAS swaps in the past. My passenger side tower cracked apart and is barely hanging onto the frame, and the driver side is cracking in the same locations. This cracking and failure was caused by modifications made by previous owner for a mild lift, not simply stock parts failing.
Truck is unsafe to drive as is and parked until I can source replacements. Hoping someone might have a set on the shelf collecting dust or can find a set for me, cause I'm not having any luck sourcing them locally.
Last edited: