• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

4x4 Electrical Diagrams and Cruise Control


BackwoodsSaint

New Member
Joined
Dec 4, 2012
Messages
51
Reaction score
0
Points
0
Location
Minnesota
Vehicle Year
1994
1992
Make / Model
Ford
Engine Size
3.0 and 4cyl
Transmission
Manual
Hey got two things I'm having some problems with on my '94 Ranger, first off my 4x4 isn't working right, it hasn't since last year some time and I'm sick of it, I replaced the transfer case motor with a new one when it burned out but now it's not working again, the lights on my dash started flashing one day and out of curiousity i took down my transfer case motor and found it had engaged the four wheel drive, because i had manual hubs that were unlocked i hadn't noticed. Now i'm working on it again and i'm finding that there seems to be a wiring issue between the switch and the 4x4 control module because the test light will not blink or come on on the module- does anybody have a wiring diagram that would tell me where these wires are routed? I can't find one in my Haynes or owners manual, thanks.

On a different note my truck came with an aftermarket cruise control which the previous owner (who was NOT a mechanic) installed and did a horrible job of, any tips on uninstalling and re-doing the work on this?

Thanks for any help ya'll can give
 


Rock Auto 5% Discount Code: 81874766E40C6A 5th, 2022

BackwoodsSaint

New Member
Joined
Dec 4, 2012
Messages
51
Reaction score
0
Points
0
Location
Minnesota
Vehicle Year
1994
1992
Make / Model
Ford
Engine Size
3.0 and 4cyl
Transmission
Manual
I'd love to take a look at that schematic, thanks
 

BackwoodsSaint

New Member
Joined
Dec 4, 2012
Messages
51
Reaction score
0
Points
0
Location
Minnesota
Vehicle Year
1994
1992
Make / Model
Ford
Engine Size
3.0 and 4cyl
Transmission
Manual
yeah, thanks for the help
 


Top