Jellybob
New Member
- Joined
- Feb 22, 2021
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- Michigan
- Vehicle Year
- 1993
- Make / Model
- Ford Ranger
- Transmission
- Manual
Hello everyone, sooo i recently bought a 93 ranger stick 4x4 with the 3.0 for 750 now with parts im at about 1600, and im on the last parts of getting this truck running 100% but im having issues with trying to hook up some kind of exhaust. Now the nice feller who owned this truck before me decided it was a great idea to cut off the exhaust a couple inches after the o2 sensors, and flex pipe 2 cherry bombs to it. With the only support being rested on the transmission mount. So the first day i got the truck on a hoist a coworker and I took those off (approximately a month ago) and today took the remaining 4 inches of y pipe off breaking both studs of the left side manifold, but the right side came off clean. And now i would like to rebuild the exhaust or make some custom exhaust because just the headers are starting to get to me, and also im trying to figure out why the engine is loping at idle, but i can't seem to find a y-pipe for a 3.0 liter, and 4.0 y pipe wont line up, i tried that already the pipe bends differently on the right side, so now i dont know if i should just take it to an exhaust shop or if theres some market of 3.0 y pipes thats just not showing up, i dont know, but a feller could use a bit of advice and any at all will be appreciated. Thank you for your time.