nismotunedgtr
Member
- Joined
- Jan 14, 2008
- Messages
- 216
- Reaction score
- 0
- Points
- 16
- Age
- 34
- Location
- USA
- Vehicle Year
- 1998
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Automatic
Hey I got a set of 2" lift coils for my Ranger off a friend. He bought them for his B2....
I have a 1992 STX with the 2.9L (FOR NOW)...
Got one of my coils out tonight and it's the same exact height as the lift coils. I can't compress the lift coils by hand but I can compress the stock ones a little. Is this how I'm going to get lift?
I got the Moog fully adjustable -4* to 4* alignment bushings and I plan on maxing them out with washers under the springs if need be.
So am I going to get any lift with these?
Thanks!
I have a 1992 STX with the 2.9L (FOR NOW)...
Got one of my coils out tonight and it's the same exact height as the lift coils. I can't compress the lift coils by hand but I can compress the stock ones a little. Is this how I'm going to get lift?
I got the Moog fully adjustable -4* to 4* alignment bushings and I plan on maxing them out with washers under the springs if need be.
So am I going to get any lift with these?
Thanks!