neinnein_nein
Active Member
- Joined
- Aug 5, 2017
- Messages
- 116
- Reaction score
- 30
- Points
- 28
- Location
- new york
- Vehicle Year
- 1984
- Make / Model
- ford ranger
- Engine Type
- 2.3 (4 Cylinder)
- Engine Size
- soon-to-fire up 2.3 turbo lima
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- Total Lift
- 3!!
I put in the 3inch body lift from Jeff bronco graveyard while doing a swap, put in the extension and the car hasn’t moved since because I’m still working on the engine, but as of now it’s 2 inches short.
you guys know if there’s a way to pull on the upper shaft? It ends at the brake booster which even lifted seems suspiciously high.
Should I put a bolt in it and hammer downwards?
You can see the seem between extension and original column on pic 2 just below the chrome bolt..
you guys know if there’s a way to pull on the upper shaft? It ends at the brake booster which even lifted seems suspiciously high.
Should I put a bolt in it and hammer downwards?
You can see the seem between extension and original column on pic 2 just below the chrome bolt..