fleetbob1
New Member
- Joined
- Dec 4, 2007
- Messages
- 16
- Reaction score
- 0
- Points
- 0
- Location
- Union, NJ
- Vehicle Year
- 1996
- Make / Model
- Ford
- Engine Size
- 5.8
- Transmission
- Automatic
I am in the process of building the untimate Ranger the "Ronco"
it was a 1979 Bronco
Now its a 1996 Ranger
I took a perfectly good 1979 Bronco, scrapped the body, then I built the engine 351M 500 HP 700lbs ft Torque.Rebuilt the C6 trans, resealed the NP205 transfer case, rebuilt the 9" rear w/ spool added powertrax locker to the front Dana 44 solid axle, then a 4" suspension lift and 36" TSL radials.
Then I took a perfectly good 1996 Ranger 3.0 4X4 and took off the body & bed, fitted the body on the bronco. = the "Ford Ronco"
I will post pix soon
I am in the process of fitting the body now
I have to do the suspension lift & tires too but this Sunday I will finish the Body fitment, then steering, brakes,etc..........
it was a 1979 Bronco
Now its a 1996 Ranger
I took a perfectly good 1979 Bronco, scrapped the body, then I built the engine 351M 500 HP 700lbs ft Torque.Rebuilt the C6 trans, resealed the NP205 transfer case, rebuilt the 9" rear w/ spool added powertrax locker to the front Dana 44 solid axle, then a 4" suspension lift and 36" TSL radials.
Then I took a perfectly good 1996 Ranger 3.0 4X4 and took off the body & bed, fitted the body on the bronco. = the "Ford Ronco"
I will post pix soon
I am in the process of fitting the body now
I have to do the suspension lift & tires too but this Sunday I will finish the Body fitment, then steering, brakes,etc..........