olddadof7
New Member
- Joined
- Jun 23, 2019
- Messages
- 3
- Reaction score
- 1
- Points
- 3
- Location
- Belton. South Carolina
- Vehicle Year
- 1986
- Make / Model
- Ford Ranger 2.0
- Transmission
- Manual
Hello guys, I bought a Ranger years ago to build with my youngest son. Him and my friend's son rode around a pasture and agreed on 250.00 dollars in 2014. I finally returned home from working in Mexico and we have pulled it out of the our pasture and begun work on it. we have replaced the list of parts below.
Master cylinder
both front calibers, both flex lines, brakes, and shocks.
all tie in rods
repaired rear brakes and replaced shocks
replaced brake light sockets and cleaned polished lenses
replaced fuel pump
replaced carburetor
I really need help. The shifter has fallen apart and I cannot find parts. I also need to fix fuel gauge. Does anyone know where I can find parts. My son is going to be a tech scholar soon at local plant and he is very proud of this little truck and I really want us to be able to get it going and it be safe and usable for him. I have included some pictures and the VIN to help. I will also need to source a grill, and a steering wheel. I would also like to replace the bench with something that has head support. Thanks for reading and any help you guys can give.
1986 Ford Ranger 2.0 liter carb motor 5 speed manual trans
VIN : 1FTBR10C6GUB74950
Master cylinder
both front calibers, both flex lines, brakes, and shocks.
all tie in rods
repaired rear brakes and replaced shocks
replaced brake light sockets and cleaned polished lenses
replaced fuel pump
replaced carburetor
I really need help. The shifter has fallen apart and I cannot find parts. I also need to fix fuel gauge. Does anyone know where I can find parts. My son is going to be a tech scholar soon at local plant and he is very proud of this little truck and I really want us to be able to get it going and it be safe and usable for him. I have included some pictures and the VIN to help. I will also need to source a grill, and a steering wheel. I would also like to replace the bench with something that has head support. Thanks for reading and any help you guys can give.
1986 Ford Ranger 2.0 liter carb motor 5 speed manual trans
VIN : 1FTBR10C6GUB74950
Attachments
-
101.8 KB Views: 167
-
55.4 KB Views: 173
-
134.7 KB Views: 179
-
104.3 KB Views: 163
-
168.9 KB Views: 154