1960 F-100 4wd

[mhughes165]

im pickin one up here shortly, it has the 292 y block, a 4speed on the floor and a divorced 205, has a 44 and a 60 in it, was wondering if anyone knew where one could find lift components for one of these trucks

 

[mjonesjr]

I would almost bet they have the same suspension that the '70 model F-150's had.

I didn't think that they issued factory 4wd till the late 1960's. It may be all custom.

 

[mhughes165]

I would almost bet they have the same suspension that the '70 model F-150's had.

I didn't think that they issued factory 4wd till the late 1960's. It may be all custom.

its a factory 4wd vehicle, it has what was known as the heavy half ton package, and from what ive gathered it is leafs in the front of that truck

 

[Adrianspeeder]

Want to poke around over on www.slick60s.net

Adrianspeeder

 

[85_Ranger4x4]

its a factory 4wd vehicle, it has what was known as the heavy half ton package, and from what ive gathered it is leafs in the front of that truck

Are you sure it isn't at least a F-150? By definition the F-100 was a light half ton...

In that time period, it should have leaves all around which should make lifting fairly easy.

Post pictures when you get it, old iron is interesting.

 

[Mac]

Don't think the F-150 came around till '75'. I remember putting 3500 lbs of ag lime in my '73' 4x4 F-100.
Dave

 

[wrecking-crew]

im pickin one up here shortly, it has the 292 y block, a 4speed on the floor and a divorced 205, has a 44 and a 60 in it, was wondering if anyone knew where one could find lift components for one of these trucks

you basturd. i want that truck.


and you suck.......i cant find any decent factory 60's ford 4x4 trucks in good condition

 

[mhughes165]

you basturd. i want that truck.


and you suck.......i cant find any decent factory 60's ford 4x4 trucks in good condition

well, ill only be gettin it if someone buys my mustang within the next few days

 

[wrecking-crew]

well, ill only be gettin it if someone buys my mustang within the next few days

how much is it.....i might have to buy it if you dont...

 

[mhughes165]

how much is it.....i might have to buy it if you dont...

im not at liberty to say LOL

 

[wrecking-crew]

im not at liberty to say LOL

damn.....is it from a jy? i know that yards dont like to tell you the price

 

[mhughes165]

nope lol i will never tell


damn, where are all the old fogeys around this place that are old enough to remember these trucks LOL

 

[rusty ol ranger]

Lift blocks would be the eaisest way to lift it.

later,
Dustin

 

[RumpRangerSTX]

lift blocks in the front wtf u would be nuts to even say something like that wtf

 

[Will]

im pickin one up here shortly, it has the 292 y block, a 4speed on the floor and a divorced 205, has a 44 and a 60 in it, was wondering if anyone knew where one could find lift components for one of these trucks

I don't know much about these but if it's original, and is an F100, it definately has a 9" Ford rear and a Dana 44 (if that is what a Spicer 55 is). The transfercase is probably a divorced Dana 24 as I don't think the NP205 was around yet. An F250 would probably have the same front axle, and a Dana 60 rear.