1350/1354 borg warner doubler


Levi.jones19

New member
Joined
Jun 12, 2014
Messages
3
Reaction score
0
Points
0
Vehicle Year
1983
Make / Model
Ford
Transmission
Manual
Ive been trying to find a solid answer. I have two bw 1350s and want to do a dual setup. So far ive only seen 1350/1354 doublers. Do i need to find a 1354 or can i use the two 1350s? They Are both manual shifts so im not asking about that. Help apreciated
 


Rock Auto 5% Discount Code: CFB3B5F7F32B37 Expires: March 30, 2020

sbsrlewis

Member
U.S. Military - Veteran
TRS Banner 2010-2011
Joined
Aug 8, 2007
Messages
362
Reaction score
4
Points
18
Age
54
Location
Shawnee, Oklahoma
Vehicle Year
1989
Make / Model
Ford
Engine Size
4.0
Transmission
Manual
Yes you can use the 1350's.


Steve
 

Levi.jones19

New member
Joined
Jun 12, 2014
Messages
3
Reaction score
0
Points
0
Vehicle Year
1983
Make / Model
Ford
Transmission
Manual
Whats the difference in the 50-54?
 

sbsrlewis

Member
U.S. Military - Veteran
TRS Banner 2010-2011
Joined
Aug 8, 2007
Messages
362
Reaction score
4
Points
18
Age
54
Location
Shawnee, Oklahoma
Vehicle Year
1989
Make / Model
Ford
Engine Size
4.0
Transmission
Manual
The front driveshaft has a slip yoke where it mates to the front output of the 1350. The 1354 has a flange that the front driveshaft bolts to. I also believe the 1354's have a 6 gear planetary vs 4 gear for the 1350.

I'm running a 1350/1354 doubler in my BII. I used the 1350 for the low box (doubler). In other words it is the one I cut down and only kept the low range. Have had no issues with this.


Steve
 

snoranger

Forum Staff Member
Forum Moderator
Supporting Member
ASE Certified Tech
Joined
Nov 25, 2007
Messages
5,538
Reaction score
1,789
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'17
Make / Model
All Fords
My credo
I didn't ask for your life story, just answer the question!
The front driveshaft has a slip yoke where it mates to the front output of the 1350. The 1354 has a flange that the front driveshaft bolts to. I also believe the 1354's have a 6 gear planetary vs 4 gear for the 1350.

I'm running a 1350/1354 doubler in my BII. I used the 1350 for the low box (doubler). In other words it is the one I cut down and only kept the low range. Have had no issues with this.


Steve
Not all 13-54s had the six gear planetary... The first few years still had the 4 gear. It's not a big deal as that isn't the weakest point of these T-cases. I twisted a rear output shaft off of a 13-50 and didn't hurt the 4gear planetary.
 


Top