05 Ranger TDI conversion

[Evguy1]

Beautiful build, question sir, I am about to start a swap myself and was wondering, do you just cut out what you don't need out of the Ranger wiring harness? Thanks

Sorry for the delay, I don't get to this forum very often. You are best to not cut anything till the swap is running and finished. You never know what wire you may need till its all done. TD Conversions has a very nice new billet engine adapter. Some guys just neatly bundle up the complete Ranger harness and tie strap it to the firewall behind the engine.

 

[WLWalker]

Sorry for the delay, I don't get to this forum very often. You are best to not cut anything till the swap is running and finished. You never know what wire you may need till its all done. TD Conversions has a very nice new billet engine adapter. Some guys just neatly bundle up the complete Ranger harness and tie strap it to the firewall behind the engine.

Thanks for the info. I do have one more question please, I have a BHW ready to install in my 05 Sport Trac with the 4 litre engine, do you know where I can get an adaptor for the 5R55E transmission? Thanks in advance.

 

[jusluv21]

I am working on basically the same swap right now. What was the solution for power steering lines, new, custom hoses?