• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

troubleshooting

  1. Ehxaust and Starting Hard

    I have a 1987 2.9L Ranger that has the stock ehxaust. I was thing of running headers to a flowmaster 40, the part I need help with is what type of headers should I get/ also I heard I should use a 2 1/2 inch pipe or a 2 1/4 inch pipe which would be better and where would I buy this? I was...
  2. 4x4 troubleshooting.

    Hello guys I'm rather new, have always read these forums and figured I'd join since I'm on here all the time. Well here's the problem: My 4x4 is not working. I got a new transfer case motor last fall and I went to get a new selector switch to see if that was the problem but it still wouldn't...
  3. transmission problems

    We just finished installing a new motor in my 1998 Ford ranger, when we started it up we noticed a noise, kinda like a knocking noise, and noticed it was coming from the transmission. I have an automatic in my truck. We took off the little plate to see if it was a loose bolt on the torque...
  4. troubleshoot 4wd

    i have a 2007 ranger xlt manual 5spd. i have the electric shift.. whenever i click it over to either 4lo or 4hi i can hear it engage and the light comes up. the front wheels spin at first but after a few seconds i hear a grinding noise from the t-case and the front wheels stop pulling... any...
  5. 3.0 engine problems.

    First off hello everyone. I'm having a little bit of a problem and looking for some help. I recently had my CEL come on and the codes were Lean bank 1, Lean bank 2, Misfire 3, Misfire 5. I changed the plugs to motor-craft, and gaped them to .046 Cleared the codes to see if they were the...
  6. theGreatDane

    Help!!!

    So i have a 1999 Ranger Supercab, 4x4 with a 4.0 and a 5 speed. A few months ago it started stuttering when cold, when i would accelerate, but would go away after 5 or so minutes of driving, and often less than that when i would floor it. Yesterday, however, it started stuttering more often...
  7. 2.3L w/ a possesed oil pressure gauge

    i've got a '90 ranger with a 2.3L (stock motor) w/ the dual plug head. after shaking my truck on a back road like a bad parent giving their kid shaken baby syndrome, my oil pressure gauge is now possesed by a skizophrenic demon. the needle goes from between the r and m on normal to "there is...
  8. Tranny issues, possibly slave cylinder?

    i have a 94 mazda b3000 with what i am pretty sure is a M50D-R1 4WD Transmission, a month ago my brother was driving it home, and he heard a noise, but couldnt describe it, shortly after it wouldnt move at all, and had to be pushed to a gas station, so heres the situation, i can start the...

Sponsored Ad


Sponsored Ad

Top