Recently found out my engine coolant temperature sits around 165-167 Fahrenheit fully warmed up. Is that normal or should it be hotter? Also my temp gauge sits below the cold line.
(It's a 98 2.5l 4 cylinder)
Hey guys! I have a 1997 2.3l ranger and I'm having trouble with finding the temp sensors I have found 2 and there right on top of the engine one just before the thermostat housing with 2 wires going into it and one on the thermostat housing with 2 wires in to it and I have one more that I can't...
2002 B3000 3.0 fresh rebuild with 150 miles on it so far. Within the past two days, I have noticed that my temp guage isn't going to to the operating range but staying right around the second white line after the "C". Drove to work this morning which is always at operating temp by the time I...
After several days of frustrating problem solving in dealing with the 'fluctuating temperature gauge on my 1992 Ranger 4x4 with the 4.0, finally figured it out.
Im not sure how often this issue occurs and only found a couple posts in dealing with this matter so here is what I went through...
My '89 2.9l EFI engine temp. gage has not worked since i bought it 4 years ago - anyone have similar problems? whats the best way to track down the engine temp. gage sensor - the haynes manual seem inaccucate and my local parts store had a two pronged senors whereas i thought i needed a single...
I have an '84 Ranger with a 2.9L v-6
I changed my water temperature sensor yesterday, and while I was doing that, I totally destroyed the electric fitting that clips to it. A few questions - 1. Does anyone know the Ford part number on this?
2. How much $ will it likely run me?
3. Is there...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.