suspension

I am currently piecing together the tubing and joints for extended rad arms, and the next thing on my list is shock mount. I checked out the f-250 shock mount mod, but I want something that can mount higher and I do not want to cut my coil bucket. I was wondering if these "Universal Shock Hoops"...

Okay guys I got a 2006 Ford Ranger Sport, 4bi with a 3 inch body lift and I want to put 35"s under it. Best bet would be to do? Would I be able to fit 35"s if I put Superlift's 4" lift in my truck with the body or would it be best to SAS the truck. I can afford both and do both easily as my...

ok guys im stuck. i bought a 2wd ranger i got it for a great price for the condition, :offtopic: but anyways i want to lift it and im not quiet sure what im doing as far as the lift kit. there was a 4x4 ranger that was lifted i just happened to see a few days ago so i bought the kit off it. ive...

So I'm working at building my 07 Ranger. My question is; Can I swap my coil spring front end with a torsion bar front end from an 02 without any fab work? I'm trying to build in stages so this will allow me to put my tires, fiberglass, and bumpers on while deciding on which suspension I want to...

Why's my Ranger's rear end always trying to skip to the right on bumps? My theory was bad shocks, combined with the effect of having a slightly shorter axle shaft on the right. I changed the shocks, all 4 of them, took it down a crappy back-road, and it rides better but still gets sideways on...

Justin here, bought an '89 Ranger 2.3, 2WD a while back. Been busy doing some fixing on it. Does a basic Ranger just drive this funky or is there something else? Front end kinda hops over to the side on bumps. I've put new tires, shocks (Bilsteins), wheel bearings, track arm bushings, I beam...

i have a 4 wheel drive 1998 ford ranger and im looking for a rugged off road suspension that will give about a 1 inch lift... every one i looked at is either for 2wd or WAAAYYY to expensive..... just something nice to clean up my front and back end and make it look nice. And with a little...

Ok here's the deal, I had a 96 ranger and after a major motor defect and baby discovery I got rid of it. It already had suspension done but I did motor, cab, bed cage and lights, fenders, bed, hood, bumpers. I just bought a wreaked 94 mazda b2300 with a bad motor for $50 off a friend and he did...

Alright so I've got a 1998 Ranger Splash 2wd with front coil springs. It has this annoying squeak in the front end when I drive down the road. When I bought it about 4 months ago the guy put in brand new suspension as it was previously slammed. I've had it up on a lift and looked at everything...

Hello Folks, I've got a '98 Mazda B2500 2WD and have been getting lots of squeak from the front passenger side. At first I thought it was my stabilizer bar link (it had snapped), so I put a new one on. It didn't stop the squeak. The sound only comes when the truck is bouncing back 'up' after...

i want to get a suspension lift for my truck. but my question is will a lift for a 2000 4.0 4x4 ranger fit my truck? and if not where can i get one that will?

hey my name is morgan cummins and i have a 3" body lift on my 2002 ford ranger with 33/12.5/15 mickey thompson mtz's. and i was wanting to know if anyone had pics of a double lifted truck with 33's?

I have a 2003 4wd Edge that I'm looking to make upgrades to....specifically removing those torsion bars. I've looked around here and a little on dezert rangers, and i've found two ideas that interest me, but i can't figure out the difficulty level or $$ for each of them. i also wanna make sure...

Alright, so here's the deal. i lifted my 2wd '96 ranger with a 4 inch Rough Country Suspension lift. it had blocks and shocks in the rear and all the fancy drop brackets and the like up front. it figures i pull a cheap move and buy a cheap lift, i expected cheap quality, but these shocks are a...

I am hearing a popping sound when I turn left but only when going fast enough for the body to rock. When I turn to the right after this happens is makes a grinding sound like it's moving back into place. Any ideas on what this could be?

I am not to sure exactly where the front I-beam brackets are supposed to be mounted. Super Lift instructions are half as**d and I cant figure this out...Would anyone have images or and idea of where exactly to mount these brackets. Also I am not sure where the Super Lift traction bar brackets...

Im new here, so bare with me ;o) I have a stock 08 Ranger Sport, with factory rims and tires.... Ive worned out the suspension and the tires are done... I figured might as well get the 30's BFG M/T i wanted. My delema is that I need to replace the shocks ASAP, i thought of getting the FABTECH...

This past weekend I put 2" leveling coils on my '93 Xlt, and I'm pretty sure that I need new shocks. My current ones are limiting the lift of the springs and they are completely maxed out, so I'm going to be buying new ones. So, I have a couple questions. First, What /stroke should I buy...

I have a 2006 Ford Ranger Sport 4x4 with a 3 " body lift. I want to put 35" tires on it and was planning on getting a suspension lift but many people have told me I can fit these tires on with just a torsion bar crank. I am wondering if this will have any effects on the truck itself by cranking...

I'm in the process of trying to decide where to cut and turn the i-beams. I use the truck mostly for driving, and the occasional weekend trip to the local ORV park. I've seen a lot of people cut and turn them at the ball joints, or they cut them in the middle of the beam. What I'm wondering...