• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' the posts that you read.

squeal


  1. Intermitent bearing squeal(PS pump)?

    I have a noise that sounds like a bearing squeal but it usually occurs at start up and goes away in a second or two but can last several seconds at times. It is so loud with the hood up that i can't pin-point the location but when setting in the cab it seems to be directly in front of me. I...
  2. major squealing without belt

    So, i currently own a 1997 ford ranger 4.0 automatic, but just bought a 1993 ranger 4.0, manual trans that had a plow and was what ive been looking for. It does not have any clutch feel to it ( little to no resistance) the previous owner claims to have replaced the master cyl. but a few shops he...
  3. ant.xlt.96

    Tap out broken bolts? - alternator bracket

    Hi all, I've got two snapped bolts out of the three that hold the alternator bracket. They're flush, so nothing to grab on to. (This is a 96 4.0L xlt 2wd for reference. ) I've been able to drill out enough to try an ez-out screw removal tool, but the first one broke. I've taken this engine...
  4. Bearing/Belt squeal

    I have had a slight squeal for a couple of weeks and I thought I would get it fixed early so I replaced the Tensioner, Idler and the Belt. The squeal got remarkably worse so I read the various forums and saw that the alternator is usually the culprit.So off the the store I go and get a new...


Top