rabs

Hey there, I have a 1990 Bronco II XLT 4x4 that has been edging ever closer to finish. I've recently replaced the brakes almost in their entirety for the rear and still after bleeding the entire system have both the yellow and red brake lights illuminated and I now have a flashout CODE 4...

there was no codes being thrown before i replaced the valve as i had replaced with new abs module and rabs valve from junkyard. brakes worked alright but the rabs valve had a leak in one of the seals so i decided to replace it with a new one, after replacing and bleeding all 4 it threw a code 4...

I just picked up a 93 splash and the back brakes don't work at all. I've done some research here and on other forums and it all seems to point to the rabs system. I plan on bypassing it all together,because non abs back brakes seems safer than no back brakes. (the front brakes are over worked in...

I just picked up a 93 splash and the back brakes don't work at all. I've done some research here and on other forums and it all seems to point to the rabs system. I plan on bypassing it all together,because non abs back brakes seems safer than no back brakes. (the front brakes are over worked in...